« Back

X100 Series

So much power in so little space.
A long-term investment: The X100 Tractor Series far exceeds expectations!

If you want durability, look no further.
Fully welded frame, cast-iron front axle and fully enclosed UV resistant bonnet - these are just some of the many benefits of these heavy-duty  lawn tractors. So you can look forward to year after year of performance.

Recommended Mowing Area (For X165)Up to 6000 m²
Cutting Width122cm (48in)
Engine Power13.3 kW at 3350 rpm
SpeedUp to 8.9 km/h (5.5 mph) Forward

Find more information on the key features of the product below.

Full length steel frame      

The solid one-piece frame is constructed of 12-gauge (0.11-in., 3.0-mm) steel. This full-length robotically welded frame design has high-strength steel rails for added strength and long life and a one-piece fender deck bolted to the frame.

Powerful engine

A 9.8 kW (at 3150 rpm) single-cylinder engine has plenty of power and torque to handle tough mulching, mowing, and collecting conditions:

  • Electronic      ignition for fast starts
  • Cast-iron      sleeve for long engine life
  • Overhead      valves for excellent power and fuel economy

Comfortable Operation

Operator comfort is central to the X100 series design. Wide footrest areas with non-slip, anti-vibration rubber footpads are provided for operator comfort and safety. An adjustable seat gives extra operator comfort, allowing you to tailor the machine to the individual operator.

Robust Bonnet

The bonnet is made of injection-molded, UV-resistant JD Loy polymer:

  • JD Loy material is tough and durable.
  • Will not dent or rust
  • Colour is molded in for long-lasting good looks.
  • UV-resistant JD Loy material resists fading.
  • Openings on the side of the bonnet let in plenty of cooling air whilst keeping the sound level low.
  • Two headlights provide good lighting when needed.

Twin Pedal Hydrostatic Operation

A Kanzaki® Tuff Torq® hydro/automatic transmission gives an infinite choice of speeds and makes changing the direction of travel easy:

  • Automotive-type accelerator provides infinite speed selection for the ultimate in operator comfort and convenience.
  • Pedals have a different shape and motion , for easy identification and increased safety.

RIO – Reverse Implement Option

Mowing while reversing is strongly discouraged. The operator who deems it necessary to keep the mower (or other implement) engaged whilst reversing should first bring the tractor to a stop and look behind the tractor to be sure there are no bystanders. Then actuate (push in) the RIO button. The RIO button must be held down in the reverse implement position as the shift lever is moved into reverse (reverse foot pedal is depressed on automatic drive models). The operator may then release the button and the mower will continue to operate whilst reversing and also when resuming forward operation. This procedure must be repeated the next time the operator chooses to keep the mower engaged whilst reversing. If the mower (PTO) is engaged and the operator shifts into reverse or depresses the reverse pedal prior to pressing the RIO button, ignition to the engine will be shut off. The engine will stop unless the operator either pushes on the RIO switch or shifts out of reverse. If the engine does stop, the operator must return the mower engagement (PTO) switch or lever to the ''off'' position, depress the brake pedal, and then turn the ignition switch to restart the engine

Edge Mowing System

The Edge Cutting System gives superior convenience, performance, and reliability. The 107cm (42-in). two-spindle, three-in-one mower is constructed of 12-gauge (0.105-in., 2.7-mm) steel for long life:

  • Deep-deck mower design lifts grass for a clean, even cut.
  • Smooth underside of mower prevents grass buildup and evenly disperses grass clippings.
  • The rolled outer edge of the deck provides extra strength and protection.
  • Dual-stage E-coat and powder paint coatings provide extra protection from rust.
  • No tools are required to go from mulching to side discharge to collection (collection system are an optional extra)

The blade-to-spindle design provides a unique mounting system for the mower blade that gives extra safety and convenience.

Wash Port

A wash port is provided to make cleaning the underside of the mower deck easy - simply attach your garden hose to the wash port and allow water to circulate and clean the underside of the deck for maximum performance each and every time.

Height of cut adjustment

The height of cut lever is spring-assisted, minimising the effort required when adjusting. Increments of 1/4-in. allow you to fine-tune the cut height.

Cast Iron Front Axle

The front axle is constructed of solid cast iron that will not bend:

  • Automotive-like steering system with sector and pinion steering gears and dual drag links provides a very strong, low-effort, and tight-turning system.
  • Greass fittings allow regular lubrication to help maintain easy steering and minimize wear.
  • Large, 3/4-in. diameter wheel spindles provide excellent durability.


Please Enquire for Pricing
Please Enquire for Pricing