« Back

X300 Series


Perfection taken to new heights.
Highly manoeuvrable and robust construction: X300 Series tractors boast both of these qualities and more!

An accurate cut down to the smallest blade.
Manoeuvrable even in the most confined areas. Extremely powerful  engines with outstanding fuel efficiency. What about the cut? Pure  precision. Every single blade of grass is perfectly cut leaving an immaculate finish.

For a great cut
You are looking for a perfectly even cut lawn. Depending on  working conditions it is therefore necessary to level the mower deck. We  have included a more flexible way to level the mower deck in the X300  and X500 series lawn tractors.
The direct access through the fender deck as well as the usage of a new  tool lets you economize over 50% of the actual time you need to level  the mower deck.

Recommended Mowing AreaUp to 8000 m²
Cutting Width107cm (42in) or 122cm (48in)
Engine Power13.8 kW (at 3350 rpm)
Forward SpeedUp to 10 km/h (6.2 mph)


The frame is made of heavy formed and welded steel, reinforced in critical areas for even greater strength:

  • The frame is formed from 3-mm (0.118-in) thick material for long life.
  • Standard front bumper and hitch plate are formed from 3.8mm (0.15-in.) steel and complete the frame assembly.
  • Rear hitch plate can support two 42-lb Quik-Tatch weights.
  • Weight bracket is built into the frame of two-wheel-steer models. (Note: Four-wheel-steer models require the optional weight bracket.)

Twin touch pedals

Twin Touch foot pedals control the speed and direction of travel:

  • Automotive-type accelerator control ensures easy operation.
  • Operator can change direction without lifting foot off the platform.
  • Large pedal surface gives superior operator comfort.

Cruise control
Cruise control is standard equipment:

  • To engage, lift up on the cruise lever and hold until the foot is removed from the forward pedal.
  • For emergency stop, the cruise control can be released by pushing on the brake pedal or the forward pedal.

Convenient controls

The contoured dash has clean, attractive styling:

  • Controls are colour-coded and labeled with English words for easy identification by the operator.
  • Controls are logically placed and easy to reach.
  • Hourmeter makes it easy to tell when oil changes and other maintenance should be performed.
  • Separate engine speed and choke controls make starting and warming up the engine easier in cold weather.
  • The choke lever is spring loaded to eliminate the chance the tractor will be unintentionally operated with the choke partially closed.
  • Functional design of the throttle and choke controls provides good appearance and a comfortable feel.


The tractor is powered by a John Deere iTorque™ power system, a combination of engine features and an exclusive bonnet design that provides superior working ability, even cooling, and durability.

Key engine features include:

  • 13.8 kW(at 3350 rpm)
  • V-twin air-cooled design that provides smooth, quiet power

Quality features include:

  • Cast-iron cylinder liners
  • Overhead valves
  • Full-pressure lubrication
  • Replaceable oil filter
  • Dual-stage air cleaner
  • V-twin design
  • Excellent power and performance
  • Easy starts
  • Smooth operation

Flywheel alternator
A flywheel alternator provides plenty of capacity to quickly recharge the battery and power electrical equipment, such as lights or a sprayer:

  • 15-amp capacity
  • Regulated to keep the battery at full charge without risk of overcharging

Choice of Mower decks

The X300 has a choice of different decks available to help tailor the machine to individual requirements. Your local dealer will be able to provide the specialist advice that you need.

97cm (38-in.) Edge Xtra Deck
The 97cm (38-in.) Edge Xtra Deck is available for the Select Series™ X300 Tractor. It includes:

  • A resilient 4-point mounting system
  • Wide anti-scalp wheels
  • Cut-height increments of 6.4mm
  • Onboard deck-leveling system
  • Side discharge design

This mower deck can be equipped with an optional mulching attachment or collection system.

107cm (42-in.) Edge Xtra Deck
The 107cm (42-in.) Edge Xtra Deck provides the performance advantages of a two-spindle mower in a wide 107cm (42-in.) size:

  • Resilient  four-point mounting system
  • Wide anti-scalp wheels
  • 6.4mm (1/4 in.)cut-height increments
  • Onboard deck-leveling system
  • Side discharge design
  • The strength of the deck is enhanced by the top-discharge design. A section of material below the discharge opening ties the front and rear of the deck together.

This mower deck can be equipped with an optional mulching attachment or collection system.

107cm (42-in.) Edge Xtra Mulching Deck
The 107cm (42-in.) Edge Xtra Mulching Deck is designed as a dedicated mulching deck to produce the best in class mulching performance:

  • Resilient four-point mounting system
  • Wide anti-scalp wheels
  • 6.4mm (1/4 in.)cut-height increments
  • Onboard deck-leveling system
  • Removable rear plates to allow processing of longer grass where efficient mulching is not permitted by grass condition (no tools needed)

Easy height of cut and deck leveling adjustment

A rotary dial knob makes adjusting the mower cut height quick and easy:

  • Provides mower cut heights in 6.4mm (1/4 in.) increments from 25 – 102mm (1 to 4in.)
  • Returns the mower deck to the same preset height each time it is lowered
  • Onboard deck-leveling gauge, located in the center of the cut-height adjusting knob, used in conjunction with Exact Adjust ports for easy and accurate leveling of the mower deck for optimum mowing performance


The X300 Series features a pedal system to lift and lower the deck. Pushing with the foot to raise the mower or implement is less strenuous for many operators than using a hand-lift lever:

  • The easy-to-use raised position lock operates similarly to the park brake lock.
  • The foot pedal is out of the way and not likely to catch on bushes and tree limbs when mowing.
  • The  mower deck returns to the same preset height each time it is lowered.

Comfortable operator station

An open-back 38cm (15-in.) high-back seat provides a comfortable, smooth ride and good support for the operator:

  • Seat travel of 18cm (7 in.) with 15 positions allows the operator to be seated comfortably and easily operate the controls.
  • Seat can be easily adjusted fore and aft by the operator while sitting on the seat.
  • Open-back design allows air circulation to keep the operator's back cool and dry for a more comfortable ride.
  • Grasp at the top of the seat is conveniently located for use when tilting the seat up to protect it from the weather.

The seat suspension is adjustable, without tools, for the weight of the operator:

  • Springs are adjustable fore and aft to any of three positions.
  • No tools required
  • Allows fine-tuning of the suspension for the operator's weight
  • Back position for more support for heavier operators
  • Tool tray is designed into the seat base.
  • Can be used to store gloves, small tools, etc.

A cup holder and tool tray are located on the fender for operator convenience:

  • The cup holder holds a variety of container sizes.
  • Tool tray provides convenient storage.
  • Cup holder and tool tray are constructed of durable acrylonitrile butadiene styrene (ABS) plastic

Heavy duty front axle and wheel spindle

Front axle is made of nodular cast iron:

  • Cast-iron front axle is strong and shock-resistant.
  • Cast iron will not yield under heavy loads or impact.

Replaceable bushings are used at pivot and spindles:

  • Bushings provide excellent wear resistance.
  • Grease cavity between the bushings maintains lubrication and easy steering      between greasings.
  • Grease fittings at each spindle are easy to service.

Front steering spindle diameter is 19mm (3/4-in.) for strength and long life:

  • Strength to handle heavy implements
  • Long life at bearing surfaces
  • Sealed precision bearings in front wheels

Reverse Implement Option

Mowing while backing up is strongly discouraged.

An operator who deems it necessary and chooses to keep the mower engaged while backing up, must bring the vehicle to a stop, then lift and hold the power take-off (PTO) switch in the reverse implement position as the reverse pedal is depressed slightly. The operator can then release the PTO switch and the mower will continue to operate.

This procedure must be repeated the next time the operator chooses to keep the mower (or other PTO-operated equipment) engaged while backing up

Low effort steering

A heavy-duty sector and pinion steering system with quality bearings provides easy and precise control for the life of the tractor:

  • Small 40.6cm (16-in.) turning radius provides excellent maneuverability.
  • Tight turning ability improves mowing efficiency.

Easy steering is important for an enjoyable mowing experience:

  • Large, 36cm (14-in.) diameter steering wheel for improved leverage
  • Large sector gear for improved (higher) steering ratio
  • A higher ratio equals lower steering effort
  • Dual drag links to help equalize the steering loads and reduce steering error
  • Ball-joints on both ends of the steering tie rods for long life
  • Long steering arms to improve the mechanical advantage of the steering system through the full range of motion
  • Sector gear that pivots on a shaft rather than a bushing to ensure proper gear mesh and eliminate binding
  • Greaseable front steering spindles that pivot on heat-treated bushings to reduce friction and improve wear over time

Modern and distinctive

Smooth, rounded contours present a modern, styled appearance:

  • Bonnet styling incorporates efficient full-length air-intake louvers on each side, rather than on the top for cooler engine operation and lower operator station sound levels
  • Hot air is vented out the front grille, away from the operator.
  • Xenoy® molded-in-colour bonnet material is very durable with excellent impact strength, hides scratches and will not rust or dent
  • Distinctive grill and large, one-piece fender deck complete the styling package.

Large fuel tank

A translucent material allows the operator to see the fuel level:

  • Graphics on the rear of the tank show the amount of fuel left.
  • Fuel tank has a large, 13.2ltr capacity for more hours of operation between refills.
  • Large, 7.6-cm (3-in) diameter fuel tank filler opening makes adding fuel easy, located on the left fender
  • Helps eliminate spillage


Please Enquire for Pricing
Please Enquire for Pricing